☆  miuofstars  ☆ Rotating Header Image

Creative Pursuits

Rhodium (AT&T Tilt2) Deco

I’ll make a post about the phone itself later, but right now it’s deco time! :D

Nothing was stuck to the phone itself, and instead I used a pink hard cover bought from eBay. If I had used a black or clear cover the difference between the phone and the cover would be less noticeable, but for my purpose I think the pink worked out fine. Just keep that in mind when you’re deco’ing!

I used epoxy glue this time, a kind called Z-Poxy. This stuff smells poisonous (x_x) Well, at least the hardener really did. My #1 recommendation for epoxy gluing is MAKE SURE YOU CAN OPEN WINDOWS (or provide another form of sufficient ventilation). I’m serious, not only will it smell awful, but I’m pretty sure the fumes are not all that great for you to be inhaling. I had to take breaks and completed this deco over the course of a couple days, rather than 6-7 hours straight like my previous phone, where I used the glue provided by Strapya.

My epoxy glue was 30-minute set, so I would mix a small amount of the liquids, cover a small patch of the phone and decorate it. If there was too much glue and it set before I had a chance to stick anything to it, I just put more glue over it and continued. I didn’t find any problems with this process, although I did tend to use a fairly thin layer of glue when applying. Before the glue sets, you can slide things around a little to position them perfectly. I did find that even after the glue set, it was still possible for pieces to be bumped or misaligned, so please be careful in holding your deco surface after applying parts!

My materials were a plastic nut canister top, which I used as a glue mixing surface, some toothpicks for actually mixing the glue and applying to the cover, and some tweezers for moving the deco parts.

After all portions of the cover had been completed and the glue completely set (I waited an hour or two from the final portion, I think) I coated the entire thing with clear nail polish to secure the hold. Even though epoxy glue has a very strong hold, if a tiny piece is subject to external pressure it might fall off – adding a clearcoat bonds it to the surrounding parts, greatly decreasing the chance that anything will be accidentally lost. PLEASE BE AWARE THAT NAIL POLISH IS MUCH LESS VISCOUS THAN EPOXY GLUE! This means that if you’re gluing directly to an electronic’s surface, you need to be really careful about small holes and gaps in the casing as the polish will just drip in and might damage the internal elements. I felt safe doing this with my casing because it was NOT attached to the phone while I was decorating it.

If you have any further questions about this project, feel free to leave me a comment!

And here’s the final result:

Rhodium (Touch Pro 2) deco 001
I tend to like a very cluttered random deco style XD

Rhodium (Touch Pro 2) deco 002
I cover not only the back, but also all sides.

Rhodium (Touch Pro 2) deco 003
This is a bit of fail on my part – I thought I had more tinytiny pieces than just the clear/silver bits (u_u;)

Rhodium (Touch Pro 2) deco 004

Rhodium (Touch Pro 2) deco 005

Rhodium (Touch Pro 2) deco 006

Rhodium (Touch Pro 2) deco 007

Rhodium (Touch Pro 2) deco 008

Rhodium (Touch Pro 2) deco 009

Rhodium (Touch Pro 2) deco 010

Rhodium (Touch Pro 2) deco 011

Rhodium (Touch Pro 2) deco 012

Rhodium (Touch Pro 2) deco 013

Rhodium (Touch Pro 2) deco 014

Okay, I think that’s just about every possible angle XDD

Most, if not all parts (minus the tiny silver ones and the stars) were bought from Mimi Lo Lo on Etsy ♥! She has a great selection and ships pretty fast :D

Social Media Auto Publish Powered By : XYZScripts.com